This parameter contains the European Identification Number (EIN) of the issued vehicle type authorisation. Therefore, this parameter should only contain an EIN with no other text. For example: ES8020190005
PL8020210125
3.1.3.1.4 Certificate of verification : Reference of type examination or design examination type:
1/2021-1/V1
3.1.3.1.5 Parameters for which conformity to applicable national rules has been assessed:
1435mm / None (for hauled passenger vehicles and special vehicles) 2015/2299/EU
1 Documentation
2 Structure and mechanical parts
3 Track interaction and gauging
4 Braking
6 Environmental conditions and aerodynamic effects
7 External warning, signalling, marking functions and software integrity requirements
9 Staff facilities, interfaces and environment
10 Fire safety and evacuation
11 Servicing
3.1.3.1.6 Comments:
3.1.3.1.7 Reference to the written declaration by the proposer referred to in Article 3(11) of Regulation (EU) 402/2013:
7076_SWT-20 Declaration - 23.02.2021
3.1.3.1 Initial Registration
3.1.2.2 Validity of Authorisation (until):
3.1.2.3 Coded conditions for use and other restrictions:
1435mm / None (for hauled passenger vehicles and special vehicles)
1 Technical restriction related to construction
1.1 Minimum curve radius in meters: 120
1.3 Speed restrictions in Km/h: 100
2 Geographical restriction
2.1 Kinematic gauge (coding WAG TSI): G1
2.2 Wheelset gauge: 2.2.4 Gauge 1435
2.3 No CCS on board: True
3 Environmental restrictions
3.1 Climatic zone EN 50125-1:2014: 3.1.1 T1
3.1.2.4 Non-coded conditions for use and other restrictions:
3.1.3.1.1 Date of the original authorisation:
2021-07-14
3.1.3.1.2 Authorisation holder
3.1.3.1.2.1 Authorisation holder identification data
3.1.3.1.2.1.1 Name of organisation:
Plasser & Theurer Export von Bahnbaumaschinen Gesellschaft m.b.H
3.1.3.1.2.1.2 Registered business number:
ATU14654104
3.1.3.1.2.1.3 Organisation code:
3.1.3.1.2.2 Authorisation holder contact data
3.1.3.1.2.2.1 Address of organisation, street and number:
This parameter contains the European Identification Number (EIN) of the issued vehicle type authorisation. Therefore, this parameter should only contain an EIN with no other text. For example: ES8020190005
PL8020210125
3.1.3.1.4 Certificate of verification : Reference of type examination or design examination type:
1/2021-1/V1
3.1.3.1.5 Parameters for which conformity to applicable national rules has been assessed:
1435mm / None (for hauled passenger vehicles and special vehicles)
1 Documentation
2 Structure and mechanical parts
3 Track interaction and gauging
4 Braking
6 Environmental conditions and aerodynamic effects
7 External warning, signalling, marking functions and software integrity requirements
9 Staff facilities, interfaces and environment
10 Fire safety and evacuation
11 Servicing
3.1.3.1.7 Reference to the written declaration by the proposer referred to in Article 3(11) of Regulation (EU) 402/2013:
Number of vehicles composing the fixed formation (for fixed formation only) : [Number] Note: the value is mandatory for all vehicle categories. If the vehicle is composed of only one car, the indicated value shall be “1”.
1
4.10.1 Energy supply system (voltage and frequency) RC
Reference profile : [character string] Selection from predefined list (more than one possible)
(the list will be different for different categories depending on the applicable TSI)
Static axle load under exceptional payload : [number] kg
11480 kg
4.5.3.4 Position of the axles along the unit (axle spacing) : a: Distance between axles b: Distance from end axle to the end of the nearest coupling plane c: distance between two inside axles
Position of the axles along the unit (axle spacing) :
a: Distance between axles - [number] m
b: Distance from end axle to the end of the nearest coupling plane - [number] m
c: distance between two inside axles - [number] m
1435mm / None (for hauled passenger vehicles and special vehicles)
a: 0008,50 m b: 0002,17 m c: 0008,50 m
Explanations: a: 8,5 m
b: 2,17 m
c: 8,5 m
4.5.5 Total vehicle mass (for each vehicle of the unit)
4.7.5 Emergency brake : Stopping distance and deceleration profile for each load condition per design maximum speed a: Load condition: working order
b: Load condition: normal payload
c: Load condition: exceptional payload
Emergency brake : Stopping distance and deceleration profile for each load condition per design maximum speed a: Load condition: working order - [number] m [number] m/s²
b: Load condition: normal payload - [number] m [number] m/s²
c: Load condition: exceptional payload - [number] m [number] m/s²
1435mm / None (for hauled passenger vehicles and special vehicles)
a: 0000,00 m 0000,00 m/s² b: 0596,40 m 0000,65 m/s² c: 0000,00 m 0000,00 m/s²
4.7.6 For general operation :
Brake weight percentage (lambda) or Braked mass
For general operation :
Brake weight percentage (lambda) or Braked mass : Lambda (%)
[number] tonnes
1435mm / None (for hauled passenger vehicles and special vehicles)
078,00 (%) or 00017,00 tonnes
4.7.7 Service brake: At maximum service brake:
Stopping distance,
Maximum deceleration, for the load condition ‘design mass under normal payload’ at the design maximum speed.
Service brake: At maximum service brake:
Stopping distance,
Maximum deceleration, for the load condition ‘design mass under normal payload’ at the design maximum speed. :
[number] m
[number] m/s²
1435mm / None (for hauled passenger vehicles and special vehicles)
0596,40 m - 0000,65 m/s²
Type of train detection systems for which the vehicle has been designed and assessed : [Character string] From a predefined list (more than one option possible)
