1.3.2.1 Address of organisation, street and number:
Ahmet Turan Gazi Mahallesi O.S.B 2. Kısım 6. Cadde 9. Sokak No 17
1.3.2.2 Town:
Sivas
1.3.2.3 Country code:
58060
1.3.2.4 Post code:
58060
1.3.2.5 E-mail address:
Registration Method:
New Variant of a registered Type Directive 2008/57/EC
Registered Vehicle Type:
51-396-0001-8-001
1.4 Category:
Freight Wagons
1.5 Subcategory:
Freight wagon
1.6 Platform:
Sggmrs
Section 2: Conformity with TSI
2.1 Conformity with TSI and Sections not complied with:
1435mm
WAG (Reg(EU) No321/2013 amended by Reg(EU)No1236/2013 amended by Reg(EU)2015/924 amended by Reg(EU)2019/776 amended by Reg(EU)2020/387)+clause7.1.2+Appendix C totally[GE Wagon]
Noise (Regulation (EU) No 1304/2014 amended by Regulation (EU) 2019/774)
2.3 Applicable specific cases (specific cases conformity with which has been assessed)
1435mm
WAG (Reg(EU) No321/2013 amended by Reg(EU)No1236/2013 amended by Reg(EU)2015/924 amended by Reg(EU)2019/776 amended by Reg(EU)2020/387)+clause7.1.2+Appendix C totally[GE Wagon] Noise (Regulation (EU) No 1304/2014 amended by Regulation (EU) 2019/774)
2.2 Reference of ‘EC type examination certificates’
EC certificate of verification : Reference of ‘EC type examination certificates’ (if module SB applied) and/or ‘EC design examination certificates’ (if module SH1 applied)
2329/1/SB/2020/RST/DEEN/0668/V02
Section 3: Authorisations
European Union
3.0 Area Of Use:
EU(European Union)
3.1 Authorisation in
3.1.1 Member state of authorisation:
European Union(EU)
3.1.2 Current status
3.1.2.1 Status:
Valid
3.1.2.2 Validity of Authorisation (until):
3.1.2.3 Coded conditions for use and other restrictions:
1435mm
1 Technical restriction related to construction
1.1 Minimum curve radius in meters: 75
1.3 Speed restrictions in Km/h: 120 km/h empty, 100 km/h loaded to 22.5 t/axle and 120 km/h loaded to 20t/axle
2 Geographical restriction
2.1 Kinematic gauge (coding WAG TSI): G1
2.2 Wheelset gauge: 2.2.4 Gauge 1435
2.3 No CCS on board: True
3 Environmental restrictions
3.1 Climatic zone EN 50125-1:2014: 3.1.3 T3
3.1.2.4 Non-coded conditions for use and other restrictions:
1435mm
The vehicle is category FII: no hump shunting in loaded condition. The maximum cant efficiency is 130 mm
3.1.3 Historical
3.1.3.1 Αuthorisation
3.1.3.1.1 Date of the original authorisation:
2021-04-19
3.1.3.1.2 Authorisation holder
3.1.3.1.2.1 Authorisation holder identification data
3.1.3.1.2.1.1 Name of organisation:
Gök Yapı Sanayi Ticaret Anonim Şirketi
3.1.3.1.2.1.2 Registered business number:
398 065 0551
3.1.3.1.2.1.3 Organisation code:
3.1.3.1.2.2 Authorisation holder contact data
3.1.3.1.2.2.1 Address of organisation, street and number:
Ahmet Turan Gazi Mahallesi O.S.B 2. Kısım 6. Cadde 9.
This parameter contains the European Identification Number (EIN) of the issued vehicle type authorisation. Therefore, this parameter should only contain an EIN with no other text. For example: ES8020190005
EU8020210051
3.1.3.1.4 Certificate of verification : Reference of type examination or design examination type:
2329/1/SB/2020/RST/DEEN/0668/V02
3.1.3.1.5 Parameters for which conformity to applicable national rules has been assessed:
1435mm
0.0 None
3.1.3.1.6 Comments:
3.1.3.1.7 Reference to the written declaration by the proposer referred to in Article 3(11) of Regulation (EU) 402/2013:
TR/00000000311250/2021/000003
3.1.3.1 Initial Registration
3.1.2.2 Validity of Authorisation (until):
3.1.2.3 Coded conditions for use and other restrictions:
1435mm
1 Technical restriction related to construction
1.1 Minimum curve radius in meters: 75
1.3 Speed restrictions in Km/h: 120 km/h empty, 100 km/h loaded to 22.5 t/axle and 120 km/h loaded to 20t/axle
2 Geographical restriction
2.1 Kinematic gauge (coding WAG TSI): G1
2.2 Wheelset gauge: 2.2.4 Gauge 1435
2.3 No CCS on board: True
3 Environmental restrictions
3.1 Climatic zone EN 50125-1:2014: 3.1.3 T3
3.1.2.4 Non-coded conditions for use and other restrictions:
1435mm
The vehicle is category FII: no hump shunting in loaded condition. The maximum cant efficiency is 130 mm
3.1.3.1.1 Date of the original authorisation:
2021-04-19
3.1.3.1.2 Authorisation holder
3.1.3.1.2.1 Authorisation holder identification data
3.1.3.1.2.1.1 Name of organisation:
Gök Yapı Sanayi Ticaret Anonim Şirketi
3.1.3.1.2.1.2 Registered business number:
398 065 0551
3.1.3.1.2.1.3 Organisation code:
3.1.3.1.2.2 Authorisation holder contact data
3.1.3.1.2.2.1 Address of organisation, street and number:
Ahmet Turan Gazi Mahallesi O.S.B 2. Kısım 6. Cadde 9.
This parameter contains the European Identification Number (EIN) of the issued vehicle type authorisation. Therefore, this parameter should only contain an EIN with no other text. For example: ES8020190005
EU8020210051
3.1.3.1.4 Certificate of verification : Reference of type examination or design examination type:
2329/1/SB/2020/RST/DEEN/0668/V02
3.1.3.1.5 Parameters for which conformity to applicable national rules has been assessed:
1435mm
0.0 None
3.1.3.1.7 Reference to the written declaration by the proposer referred to in Article 3(11) of Regulation (EU) 402/2013:
Number of vehicles composing the fixed formation (for fixed formation only) : [Number] Note: the value is mandatory for all vehicle categories. If the vehicle is composed of only one car, the indicated value shall be “1”.
Reference profile : [character string] Selection from predefined list (more than one possible)
(the list will be different for different categories depending on the applicable TSI)
Static axle load under normal payload : [number] kg
22500 kg
4.5.3.4 Position of the axles along the unit (axle spacing) :
a: Distance between axles
b: Distance from end axle to the end of the nearest coupling plane
c: distance between two inside axles
RC
Position of the axles along the unit (axle spacing) :
a: Distance between axles - [number] m
b: Distance from end axle to the end of the nearest coupling plane - [number] m
c: distance between two inside axles - [number] m
1435mm
a: 0001.80 b: 0001.90 c: 0010.19 m
4.5.5 Total vehicle mass (for each vehicle of the unit) RC
For general operation :
Brake weight percentage (lambda) or Braked mass : Lambda (%)
[number] tonnes
1435mm
00108.00 tonnes
4.7.7 Service brake: At maximum service brake:
Stopping distance,
Maximum deceleration, for the load condition ‘design mass under normal payload’ at the design maximum speed.
Service brake: At maximum service brake:
Stopping distance,
Maximum deceleration, for the load condition ‘design mass under normal payload’ at the design maximum speed. :
[number] m
[number] m/s²
Type of train detection systems for which the vehicle has been designed and assessed : [Character string] From a predefined list (more than one option possible)
