2.1 Conformity with TSI and Sections not complied with:
1000mm / Autonomous / ASFA
Not conform to any TSI
2.3 Applicable specific cases (specific cases conformity with which has been assessed)
1000mm / Autonomous / ASFA
Not conform to any TSI
2.2 Reference of ‘EC type examination certificates’
EC certificate of verification : Reference of ‘EC type examination certificates’ (if module SB applied) and/or ‘EC design examination certificates’ (if module SH1 applied)
015/2020/V03
Section 3: Authorisations
Spain
3.0 Area Of Use:
ES(Spain)
3.1 Authorisation in
3.1.1 Member state of authorisation:
Spain(ES)
3.1.2 Current status
3.1.2.1 Status:
Valid
3.1.2.2 Validity of Authorisation (until):
3.1.2.3 Coded conditions for use and other restrictions:
1000mm / Autonomous / ASFA
1 Technical restriction related to construction
1.3 Speed restrictions in Km/h: 80
1.4 Use in multiple operation (maximum number of trainsets authorised to be coupled together to operate as a single train): 4
2 Geographical restriction
2.1 Kinematic gauge (coding WAG TSI): GED10
2.2 Wheelset gauge: 2.2.3 Gauge 1000
2.5 B System on board
2.5.1 Class B signalling system: 2.5.102 ASFA
3.1.2.4 Non-coded conditions for use and other restrictions:
1000mm / Autonomous / ASFA
2.5.2 Radio EMR RAM
Se debe anotar S/N de ECP durante la extracción de los registros ASFA.
3.1.3 Historical
3.1.3.1 Αuthorisation
3.1.3.1.1 Date of the original authorisation:
2021-03-29
3.1.3.1.2 Authorisation holder
3.1.3.1.2.1 Authorisation holder identification data
3.1.3.1.2.1.1 Name of organisation:
Renfe Viajeros SME SA
3.1.3.1.2.1.2 Registered business number:
A86868189
3.1.3.1.2.1.3 Organisation code:
3.1.3.1.2.2 Authorisation holder contact data
3.1.3.1.2.2.1 Address of organisation, street and number:
This parameter contains the European Identification Number (EIN) of the issued vehicle type authorisation. Therefore, this parameter should only contain an EIN with no other text. For example: ES8020190005
ES8020210044
3.1.3.1.4 Certificate of verification : Reference of type examination or design examination type:
ES/00000A28599033/2021/000007
3.1.3.1.5 Parameters for which conformity to applicable national rules has been assessed:
1000mm / Autonomous / ASFA 2015/2299/EU
12.2.1 National on-board signalling systems
3.1.3.1.6 Comments:
Area de uso España RFIG RAM
3.1.3.1.7 Reference to the written declaration by the proposer referred to in Article 3(11) of Regulation (EU) 402/2013:
Declaración de Proponente ASFAD RAM S526 (Viajeros).pdf con fecha 11/11/2020.
3.1.3.1 Initial Registration
3.1.2.2 Validity of Authorisation (until):
3.1.2.3 Coded conditions for use and other restrictions:
1000mm / Autonomous / ASFA
1 Technical restriction related to construction
1.3 Speed restrictions in Km/h: 80
1.4 Use in multiple operation (maximum number of trainsets authorised to be coupled together to operate as a single train): 4
2 Geographical restriction
2.1 Kinematic gauge (coding WAG TSI): GED10
2.2 Wheelset gauge: 2.2.3 Gauge 1000
2.5 B System on board
2.5.1 Class B signalling system: 2.5.102 ASFA
3.1.2.4 Non-coded conditions for use and other restrictions:
1000mm / Autonomous / ASFA
2.5.2 Radio EMR RAM
Se debe anotar S/N de ECP durante la extracción de los registros ASFA.
3.1.3.1.1 Date of the original authorisation:
2021-03-29
3.1.3.1.2 Authorisation holder
3.1.3.1.2.1 Authorisation holder identification data
3.1.3.1.2.1.1 Name of organisation:
Renfe Viajeros SME SA
3.1.3.1.2.1.2 Registered business number:
A86868189
3.1.3.1.2.1.3 Organisation code:
3.1.3.1.2.2 Authorisation holder contact data
3.1.3.1.2.2.1 Address of organisation, street and number:
This parameter contains the European Identification Number (EIN) of the issued vehicle type authorisation. Therefore, this parameter should only contain an EIN with no other text. For example: ES8020190005
ES8020210044
3.1.3.1.4 Certificate of verification : Reference of type examination or design examination type:
ES/00000A28599033/2021/000007
3.1.3.1.5 Parameters for which conformity to applicable national rules has been assessed:
1000mm / Autonomous / ASFA
12.2.1 National on-board signalling systems
3.1.3.1.6 Comments:
Area de uso España RFIG RAM
3.1.3.1.7 Reference to the written declaration by the proposer referred to in Article 3(11) of Regulation (EU) 402/2013:
Declaración de Proponente ASFAD RAM S526 (Viajeros).pdf con fecha 11/11/2020.
Number of vehicles composing the fixed formation (for fixed formation only) : [Number] Note: the value is mandatory for all vehicle categories. If the vehicle is composed of only one car, the indicated value shall be “1”.
2
4.13.1 Signalling
4.13.1.1 ETCS equipment on-board and the set of specifications from CCS TSI Annex A RC
Class B or other train protection control and warning systems installed (system and if applicable version) : [Character string] From a predefined list (more than one option possible)
ASFA (Digital ET v.2020 Indra)
4.13.2 Radio
4.13.2.1 GSM-R Radio voice on board and its Baseline RC
Class B or other radio systems installed (system and if applicable version) : [Character string] From a predefined list (more than one option possible)
EMR RAM
4.10.1 Energy supply system (voltage and frequency) RC
Reference profile : [character string] Selection from predefined list (more than one possible)
(the list will be different for different categories depending on the applicable TSI)
GED10
4.5.2 Design mass
4.5.3 Static axle load
4.5.3.4 Position of the axles along the unit (axle spacing) :
a: Distance between axles
b: Distance from end axle to the end of the nearest coupling plane
c: distance between two inside axles
RC
Position of the axles along the unit (axle spacing) :
a: Distance between axles - [number] m
b: Distance from end axle to the end of the nearest coupling plane - [number] m
c: distance between two inside axles - [number] m
Type of train detection systems for which the vehicle has been designed and assessed : [Character string] From a predefined list (more than one option possible)
