1.3.2.1 Address of organisation, street and number:
Ahmet Turan Gazi Mahallesi O.S.B 2. Kısım 6. Cadde 9. Sokak No 17
1.3.2.2 Town:
Sivas
1.3.2.3 Country code:
58060
1.3.2.4 Post code:
58060
1.3.2.5 E-mail address:
Registration Method:
New Version of a registered Type Directive 2008/57/EC
Registered Vehicle Type:
51-341-0001-4-001
1.4 Category:
Freight Wagons
1.5 Subcategory:
Freight wagon
1.6 Platform:
Gök Yapi Sggrs 80
Section 2: Conformity with TSI
2.1 Conformity with TSI and Sections not complied with:
1435mm
Noise (Regulation (EU) No 1304/2014 amended by Regulation (EU) 2019/774)
WAG (Reg(EU) No321/2013 amended by Reg(EU)No1236/2013 amended by Reg(EU)2015/924 amended by Reg(EU)2019/776 amended by Reg(EU)2020/387)+clause7.1.2+Appendix C totally[GE Wagon]
2.3 Applicable specific cases (specific cases conformity with which has been assessed)
1435mm
Noise (Regulation (EU) No 1304/2014 amended by Regulation (EU) 2019/774) WAG (Reg(EU) No321/2013 amended by Reg(EU)No1236/2013 amended by Reg(EU)2015/924 amended by Reg(EU)2019/776 amended by Reg(EU)2020/387)+clause7.1.2+Appendix C totally[GE Wagon]
2.2 Reference of ‘EC type examination certificates’
EC certificate of verification : Reference of ‘EC type examination certificates’ (if module SB applied) and/or ‘EC design examination certificates’ (if module SH1 applied)
2329/1/SB/2021/RST/DEEN/0790/V01
EC certificate of verification : Reference of ‘EC type examination certificates’ (if module SB applied) and/or ‘EC design examination certificates’ (if module SH1 applied)
2329/1/SB/2021/RST/DEEN/0893/V01
Section 3: Authorisations
European Union
3.0 Area Of Use:
EU(European Union)
3.1 Authorisation in
3.1.1 Member state of authorisation:
European Union(EU)
3.1.2 Current status
3.1.2.1 Status:
Valid
3.1.2.2 Validity of Authorisation (until):
3.1.2.3 Coded conditions for use and other restrictions:
1435mm
1 Technical restriction related to construction
1.1 Minimum curve radius in meters: 75
1.3 Speed restrictions in Km/h: 120 (empty wagon) / 100 (loaded wagon)
2 Geographical restriction
2.1 Kinematic gauge (coding WAG TSI): G1
2.2 Wheelset gauge: 2.2.4 Gauge 1435
2.3 No CCS on board: True
3 Environmental restrictions
3.1 Climatic zone: 3.1.3 T3
3.1.2.4 Non-coded conditions for use and other restrictions:
1435mm
The coded restrictions should include T1 as well but the system allows to select only one. It was selected T3 as it includes T1. For conformity to type see parameter 4.3.1 where both are listed.
The vehicle is category FII: no hump shunting in loaded condition. The maximum cant deficiency is 130 mm.
3.1.3 Historical
3.1.3.1 Αuthorisation
3.1.3.1.1 Date of the original authorisation:
2021-07-16
3.1.3.3.2 Date of the last modification:
2022-06-10
3.1.3.3.3 Authorisation holder
3.1.3.3.3.1 Authorisation holder identification data
3.1.3.3.3.1.1 Name of organisation:
Gök Yapı Sanayi Ticaret Anonim Şirketi
3.1.3.3.3.1.2 Registered business number:
398 065 0551
3.1.3.3.3.1.3 Organisation code:
3.1.3.3.3.2 Authorisation holder contact data
3.1.3.3.3.2.1 Address of organisation, street and number:
Ahmet Turan Gazi Mahallesi O.S.B 2. Kısım 6. Cadde 9.
This parameter contains the European Identification Number (EIN) of the issued vehicle type authorisation. Therefore, this parameter should only contain an EIN with no other text. For example: ES8020190005
CH5920193411
3.1.3.3.5 Certificate of verification : Reference of type examination or design examination type:
2329/1/SB/2021/RST/DEEN/0790/V01
3.1.3.3.6 Parameters for which conformity to applicable national rules has been assessed:
1435mm
0.0 None
3.1.3.3.7 Comments:
The type 51-341-0001-4-001 has been authorised by the Swiss NSA and it is compliant with Clause 7.1.2 of CR WAG TSI (Regulation (EU) No 321/2013) + Appendix C of CR WAG TSI (Regulation (EU) No 321/2013)
3.1.3.3.8 Reference to the written declaration by the proposer referred to in Article 3(11) of Regulation (EU) 402/2013:
"Risk declaration covering the modification of Sggrs 80 ft wagon" of 12.07.2021
3.1.3.1 Initial Registration
3.1.2.2 Validity of Authorisation (until):
3.1.2.3 Coded conditions for use and other restrictions:
1435mm
1 Technical restriction related to construction
1.1 Minimum curve radius in meters: 75
1.3 Speed restrictions in Km/h: 120 (empty wagon) / 100 (loaded wagon)
2 Geographical restriction
2.1 Kinematic gauge (coding WAG TSI): G1
2.2 Wheelset gauge: 2.2.4 Gauge 1435
2.3 No CCS on board: True
3 Environmental restrictions
3.1 Climatic zone: 3.1.3 T3
3.1.2.4 Non-coded conditions for use and other restrictions:
1435mm
The coded restrictions should include T1 as well but the system allows to select only one. It was selected T3 as it includes T1. For conformity to type see parameter 4.3.1 where both are listed.
3.1.3.1.1 Date of the original authorisation:
2021-07-16
3.1.3.1.2 Authorisation holder
3.1.3.1.2.1 Authorisation holder identification data
3.1.3.1.2.1.1 Name of organisation:
Gök Yapı Sanayi Ticaret Anonim Şirketi
3.1.3.1.2.1.2 Registered business number:
398 065 0551
3.1.3.1.2.1.3 Organisation code:
3.1.3.1.2.2 Authorisation holder contact data
3.1.3.1.2.2.1 Address of organisation, street and number:
Ahmet Turan Gazi Mahallesi O.S.B 2. Kısım 6. Cadde 9.
This parameter contains the European Identification Number (EIN) of the issued vehicle type authorisation. Therefore, this parameter should only contain an EIN with no other text. For example: ES8020190005
CH5920193411
3.1.3.1.4 Certificate of verification : Reference of type examination or design examination type:
2329/1/SB/2021/RST/DEEN/0790/V01
3.1.3.1.5 Parameters for which conformity to applicable national rules has been assessed:
1435mm
0.0 None
3.1.3.1.6 Comments:
The type 51-341-0001-4-001 has been authorised by the Swiss NSA and it is compliant with Clause 7.1.2 of CR WAG TSI (Regulation (EU) No 321/2013) + Appendix C of CR WAG TSI (Regulation (EU) No 321/2013)
3.1.3.1.7 Reference to the written declaration by the proposer referred to in Article 3(11) of Regulation (EU) 402/2013:
"Risk declaration covering the modification of Sggrs 80 ft wagon" of 12.07.2021
3.1.3.2 Correction
3.1.3.2.2 Date of the last modification:
2021-11-29
3.1.2.4 Non-coded conditions for use and other restrictions:
1435mm
The coded restrictions should include T1 as well but the system allows to select only one. It was selected T3 as it includes T1. For conformity to type see parameter 4.3.1 where both are listed.
The vehicle is category FII: no hump shunting in loaded condition. The maximum cant deficiency is 130 mm.
Number of vehicles composing the fixed formation (for fixed formation only) : [Number] Note: the value is mandatory for all vehicle categories. If the vehicle is composed of only one car, the indicated value shall be “1”.
Reference profile : [character string] Selection from predefined list (more than one possible)
(the list will be different for different categories depending on the applicable TSI)
For general operation :
Brake weight percentage (lambda) or Braked mass : Lambda (%)
[number] tonnes
1435mm
, (%) or 00088,00 tonnes
4.7.7 Service brake: At maximum service brake:
Stopping distance,
Maximum deceleration, for the load condition ‘design mass under normal payload’ at the design maximum speed.
Service brake: At maximum service brake:
Stopping distance,
Maximum deceleration, for the load condition ‘design mass under normal payload’ at the design maximum speed. :
[number] m
[number] m/s²
Type of train detection systems for which the vehicle has been designed and assessed : [Character string] From a predefined list (more than one option possible)
