1.3.2.1 Address of organisation, street and number:
Štefánikova 887/53
1.3.2.2 Town:
Poprad
1.3.2.3 Country code:
1.3.2.4 Post code:
058 01
1.3.2.5 E-mail address:
Registration Method:
New Type
Registered Vehicle Type:
1.4 Category:
Freight Wagons
1.5 Subcategory:
Freight wagon
1.6 Platform:
Kgs
Section 2: Conformity with TSI
2.1 Conformity with TSI and Sections not complied with:
1435mm
WAG (Reg(EU) No321/2013 amended by Reg(EU)No1236/2013 amended by Reg(EU)2015/924 amended by Reg(EU)2019/776 amended by Reg(EU)2020/387)+clause7.1.2+Appendix C totally[GE Wagon]
Noise (Regulation (EU) No 1304/2014 amended by Regulation (EU) 2019/774)
2.3 Applicable specific cases (specific cases conformity with which has been assessed)
1435mm
WAG (Reg(EU) No321/2013 amended by Reg(EU)No1236/2013 amended by Reg(EU)2015/924 amended by Reg(EU)2019/776 amended by Reg(EU)2020/387)+clause7.1.2+Appendix C totally[GE Wagon] Noise (Regulation (EU) No 1304/2014 amended by Regulation (EU) 2019/774)
2.2 Reference of ‘EC type examination certificates’
EC certificate of verification : Reference of ‘EC type examination certificates’ (if module SB applied) and/or ‘EC design examination certificates’ (if module SH1 applied)
1714/1/SB/2021/RST/DEEN/4156/V01
Section 3: Authorisations
European Union
3.0 Area Of Use:
EU(European Union)
3.1 Authorisation in
3.1.1 Member state of authorisation:
European Union(EU)
3.1.2 Current status
3.1.2.1 Status:
Valid
3.1.2.2 Validity of Authorisation (until):
3.1.2.3 Coded conditions for use and other restrictions:
1435mm
1 Technical restriction related to construction
1.1 Minimum curve radius in meters: 75
1.3 Speed restrictions in Km/h: 120 (empty)
2 Geographical restriction
2.1 Kinematic gauge (coding WAG TSI): G1
2.2 Wheelset gauge: 2.2.4 Gauge 1435
2.3 No CCS on board: True
2.7 Noise category: 2.7.2 Can be used in all quieter routes- TSI Noise compliant- Silent (tested against a TSI NOI)
3 Environmental restrictions
3.1 Climatic zone: 3.1.1 T1
3.1.2.4 Non-coded conditions for use and other restrictions:
1435mm
None
3.1.3 Historical
3.1.3.1 Αuthorisation
3.1.3.1.1 Date of the original authorisation:
2022-01-17
3.1.3.1.2 Authorisation holder
3.1.3.1.2.1 Authorisation holder identification data
3.1.3.1.2.1.1 Name of organisation:
Tatravagonka a. s.
3.1.3.1.2.1.2 Registered business number:
SK2020514496
3.1.3.1.2.1.3 Organisation code:
3.1.3.1.2.2 Authorisation holder contact data
3.1.3.1.2.2.1 Address of organisation, street and number:
This parameter contains the European Identification Number (EIN) of the issued vehicle type authorisation. Therefore, this parameter should only contain an EIN with no other text. For example: ES8020190005
EU8020220010
3.1.3.1.4 Certificate of verification : Reference of type examination or design examination type:
1714/1/SB/2021/RST/DEEN/4156/V01 dated 16/07/2021
3.1.3.1.5 Parameters for which conformity to applicable national rules has been assessed:
1435mm 2015/2299/EU
0.0 None
3.1.3.1.6 Comments:
3.1.3.1.7 Reference to the written declaration by the proposer referred to in Article 3(11) of Regulation (EU) 402/2013:
Declaration of Control of Risk nr. 18/2021 dated 20/08/2021
3.1.3.1 Initial Registration
3.1.2.2 Validity of Authorisation (until):
3.1.2.3 Coded conditions for use and other restrictions:
1435mm
1 Technical restriction related to construction
1.1 Minimum curve radius in meters: 75
1.3 Speed restrictions in Km/h: 120 (empty)
2 Geographical restriction
2.1 Kinematic gauge (coding WAG TSI): G1
2.2 Wheelset gauge: 2.2.4 Gauge 1435
2.3 No CCS on board: True
2.7 Noise category: 2.7.2 Can be used in all quieter routes- TSI Noise compliant- Silent (tested against a TSI NOI)
3 Environmental restrictions
3.1 Climatic zone: 3.1.1 T1
3.1.2.4 Non-coded conditions for use and other restrictions:
1435mm
None
3.1.3.1.1 Date of the original authorisation:
2022-01-17
3.1.3.1.2 Authorisation holder
3.1.3.1.2.1 Authorisation holder identification data
3.1.3.1.2.1.1 Name of organisation:
Tatravagonka a. s.
3.1.3.1.2.1.2 Registered business number:
SK2020514496
3.1.3.1.2.1.3 Organisation code:
3.1.3.1.2.2 Authorisation holder contact data
3.1.3.1.2.2.1 Address of organisation, street and number:
This parameter contains the European Identification Number (EIN) of the issued vehicle type authorisation. Therefore, this parameter should only contain an EIN with no other text. For example: ES8020190005
EU8020220010
3.1.3.1.4 Certificate of verification : Reference of type examination or design examination type:
1714/1/SB/2021/RST/DEEN/4156/V01 dated 16/07/2021
3.1.3.1.5 Parameters for which conformity to applicable national rules has been assessed:
1435mm
0.0 None
3.1.3.1.7 Reference to the written declaration by the proposer referred to in Article 3(11) of Regulation (EU) 402/2013:
Declaration of Control of Risk nr. 18/2021 dated 20/08/2021
Number of vehicles composing the fixed formation (for fixed formation only) : [Number] Note: the value is mandatory for all vehicle categories. If the vehicle is composed of only one car, the indicated value shall be “1”.
Reference profile : [character string] Selection from predefined list (more than one possible)
(the list will be different for different categories depending on the applicable TSI)
For general operation :
Brake weight percentage (lambda) or Braked mass : Lambda (%)
[number] tonnes
1435mm
065.00 (%) or 00029.00 tonnes
4.7.7 Service brake: At maximum service brake:
Stopping distance,
Maximum deceleration, for the load condition ‘design mass under normal payload’ at the design maximum speed.
Service brake: At maximum service brake:
Stopping distance,
Maximum deceleration, for the load condition ‘design mass under normal payload’ at the design maximum speed. :
[number] m
[number] m/s²
Type of train detection systems for which the vehicle has been designed and assessed : [Character string] From a predefined list (more than one option possible)
