> ERATV > Registration Details

13-175-0001-3-001 Serie 105

Status: Published
Latest Update: 2020-10-30 3:33:58 PM
PDF Excel XML

Section 1: General Information



0. Identification of the type

1. General Information

Section 2: Conformity with TSI

2.1 Conformity with TSI and Sections not complied with:

1435mm / AC 25kV-50Hz / ASFA
HS RST (Dec 2008/232/EC)

HS+CR SRT (Dec 2008/163/EC)

HS+CR PRM (Dec 2008/164/EC)

HS and CR CCS (Dec 2012/88/EU amended by Dec (EU) 2015/14)

1435mm / AC 25kV-50Hz / Level 2
HS RST (Dec 2008/232/EC)

HS+CR SRT (Dec 2008/163/EC)

HS+CR PRM (Dec 2008/164/EC)

HS and CR CCS (Dec 2012/88/EU amended by Dec (EU) 2015/14)

1435mm / AC 25kV-50Hz / LZB
HS RST (Dec 2008/232/EC)

HS+CR SRT (Dec 2008/163/EC)

HS+CR PRM (Dec 2008/164/EC)

HS and CR CCS (Dec 2012/88/EU amended by Dec (EU) 2015/14)

2.3 Applicable specific cases (specific cases conformity with which has been assessed)

1435mm / AC 25kV-50Hz / ASFA
HS RST (Dec 2008/232/EC)
HS+CR SRT (Dec 2008/163/EC)
HS+CR PRM (Dec 2008/164/EC)
HS and CR CCS (Dec 2012/88/EU amended by Dec (EU) 2015/14)
1435mm / AC 25kV-50Hz / Level 2
HS RST (Dec 2008/232/EC)
HS+CR SRT (Dec 2008/163/EC)
HS+CR PRM (Dec 2008/164/EC)
HS and CR CCS (Dec 2012/88/EU amended by Dec (EU) 2015/14)
1435mm / AC 25kV-50Hz / LZB
HS RST (Dec 2008/232/EC)
HS+CR SRT (Dec 2008/163/EC)
HS+CR PRM (Dec 2008/164/EC)
HS and CR CCS (Dec 2012/88/EU amended by Dec (EU) 2015/14)

2.2 Reference of ‘EC type examination certificates’

Reference of ‘EC type examination certificates’ - if module SB applied - and/or ‘design verification certificate’ - if module SH1 applied
0986/1/SB/2020/RST/ES/147/V01

Section 3: Authorisations

Spain

3.1.2 Current status

3.1.3 Historical

3.1.3.1 Initial Registration

Section 4: Technical Characteristics

Wheel set gauge

4.1.3 Wheel set gauge Parameter Help Text
1435 mm

4.13.1 Signalling

4.13.1.1 ETCS equipment on-board and its level Parameter Help Text
Level 2
4.13.1.2 ETCS baseline.version (x.y). If the version is not fully compatible it shall be indicated in brackets Parameter Help Text
2.0 (2.3.0.d)
4.13.1.3 ETCS on-board equipment for reception of infill-function information via loop or GSM-R Parameter Help Text
GSM-R
4.13.1.4 ETCS national applications implemented (NID_XUSER of Packet 44) Parameter Help Text
None
4.13.1.5 Class B or other train protection control and warning systems installed (system and if applicable version) Parameter Help Text
ASFA (Digital ET v2 Siemens)
LZB (LZB-80/16 EL E: 6.42)
4.13.1.6 Special conditions implemented on-board to switch over between different train protection control and warning systems. Parameter Help Text
ASFA (Digital ET v2 Siemens) -> LZB (LZB-80/16 EL E: 6.42)
Level 2 -> ASFA (Digital ET v2 Siemens)
Level 2 -> LZB (LZB-80/16 EL E: 6.42)

4.13.2 Radio

4.13.2.1 GSM-R equipment on board and its version (FRS and SRS) Parameter Help Text
7/15
4.13.2.2 Number of GSM-R mobile sets in driving cab for data transmission Parameter Help Text
1
4.13.2.3 Class B or other radio systems installed (system and if applicable version) Parameter Help Text
UIC Radio Chapter 1-4+6
4.13.2.4 Special conditions implemented on-board to switch over between different radio systems. Parameter Help Text
None
4.10.1 Energy supply system Parameter Help Text
AC 25kV-50Hz
4.10.2 Maximum power (to be indicated for each energy supply system the vehicle is equipped for) Parameter Help Text
AC 25kV-50Hz
5100 kW
4.10.3 Maximum rated current from the catenary (to be indicated for each electrical energy supply system the vehicle is equipped for) Parameter Help Text
AC 25kV-50Hz
265 A
4.10.5 Height of interaction of pantograph with contact wires (over top of rail) (to be indicated for each energy supply system the vehicle is equipped for) Parameter Help Text
AC 25kV-50Hz
4535.00 m to 6560.00 m
4.10.6 Pantograph head (to be indicated for each energy supply system the vehicle is equipped for) Parameter Help Text
AC 25kV-50Hz
1600 mm
4.10.7 Number of pantographs in contact with the overhead contact line (OCL) (to be indicated for each energy supply system the vehicle is equipped for) Parameter Help Text
AC 25kV-50Hz
1
4.10.10 Material of pantograph contact strip the vehicle may be equipped with (to be indicated for each energy supply system the vehicle is equipped for) Parameter Help Text
AC 25kV-50Hz
Plain carbon
4.10.11 Automatic dropping device (ADD) fitted (to be indicated for each energy supply system the vehicle is equipped for) Parameter Help Text
AC 25kV-50Hz
True
4.10.12 TSI conform energy meter for billing purposes installed on board Parameter Help Text
AC 25kV-50Hz
True

4.1.2 Speed

4.1.2.1 Maximum design speed Parameter Help Text
1435mm / AC 25kV-50Hz / ASFA
200 km/h
1435mm / AC 25kV-50Hz / Level 2
320 km/h
1435mm / AC 25kV-50Hz / LZB
320 km/h
4.1.4 Conditions of use regarding train formation Parameter Help Text
Fixed formation
4.1.5 Maximum number of trainsets or locomotives coupled together in multiple operation. Parameter Help Text
1435mm / AC 25kV-50Hz / ASFA
1
1435mm / AC 25kV-50Hz / Level 2
1
1435mm / AC 25kV-50Hz / LZB
1
4.1.8 Type meets the requirements necessary for validity of the vehicle authorisation granted by one Member State in other MSs Parameter Help Text
Not applicable
4.1.10 Structural category Parameter Help Text
P-II of EN12663-1:2010
4.2.1 Vehicle kinematic gauge (interoperable gauge) Parameter Help Text
G1
4.3.1 Temperature range Parameter Help Text
T3 (-25 to +45)
4.3.2 Altitude range Parameter Help Text
A1
4.3.3 Snow ice and hail conditions Parameter Help Text
nominal
4.4.1 Fire safety category Parameter Help Text
B

4.5.2 Design mass

4.5.2.1 Design mass in working order Parameter Help Text
226288 kg
4.5.2.2 Design mass under normal payload Parameter Help Text
244038 kg
4.5.2.3 Design mass under exceptional payload Parameter Help Text
244038 kg

4.5.3 Static axle load

4.5.3.1 Static axle load in working order Parameter Help Text
14797 kg
4.5.3.2 Static axle load under normal payload/ maximum payload for freight wagons Parameter Help Text
0 kg
4.5.3.3 Static axle load under exceptional payload Parameter Help Text
17000 kg
4.6.1 Cant deficiency (maximum uncompensated lateral acceleration) for which the vehicle has been assessed Parameter Help Text
1435mm
154.4 mm
4.6.2 Vehicle equipped with a cant deficiency compensation system (“tilting vehicle”) Parameter Help Text
False
4.7.1 Maximum train deceleration Parameter Help Text
1.33 m/s²

4.7.2.1 Brake performance on steep gradients with normal payload

4.7.2.1.1 Reference case of TSI Parameter Help Text
Reference case (90% of design speed, Category 1 of HS INF TSI Dec 2008/217/EC)

4.7.3 Parking brake

4.7.3.2 Parking brake type (if the vehicle is fitted with it) Parameter Help Text
Automatic
4.7.3.3 Maximum gradient on which the unit is kept immobilized by the parking brake alone (if the vehicle is fitted with it) Parameter Help Text
35 ‰ (mm/m)

4.7.4.1 Eddy current brake

4.7.4.1.1 Eddy current brake fitted Parameter Help Text
False

4.7.4.2 Magnetic brake

4.7.4.2.1 Magnetic brake fitted Parameter Help Text
False

4.7.4.3 Regenerative brake (only for vehicles with electrical traction)

4.7.4.3.1 Regenerative brake fitted Parameter Help Text
True
4.7.4.3.2 Possibility of preventing the use of the regenerative brake (only if fitted with regenerative brake) Parameter Help Text
False
4.8.1 Vehicle length Parameter Help Text
101.2 m
4.8.2 Minimum in-service wheel diameter Parameter Help Text
850 mm
4.8.4 Minimum horizontal curve radius capability Parameter Help Text
250 m
4.8.8 Suitability for transport on ferries Parameter Help Text
False
4.9.1 Type of end coupling (indicating tensile and compressive forces) Parameter Help Text
Automatic Type 10 / Scharfenberg
4.9.2 Axle bearing condition monitoring (hot axles box detection) Parameter Help Text
Onboard equipped (OP)

4.9.3 Flange lubrication

4.9.3.1 Flange lubrication fitted Parameter Help Text
True
4.9.3.2 Possibility of preventing the use of the lubrication device (only if fitted with flange lubrication) Parameter Help Text
False
4.11.1 Pass-by noise level (dB(A)) Parameter Help Text
92 dB(A)
4.11.2 Pass-by noise level was measured under reference conditions Parameter Help Text
False
4.11.3 Stationary noise level (dB(A)) Parameter Help Text
63 dB(A)
4.11.4 Starting noise level (dB(A)) Parameter Help Text
77 dB(A)

4.12.1 General passenger related characteristics

4.12.1.1 Number of fixed seats Parameter Help Text
From 00211 To 00211
4.12.1.2 Number of toilets Parameter Help Text
5
4.12.1.3 Number of sleeping places Parameter Help Text
From 00000 To 00000

4.12.2 PRM related characteristics

4.12.2.1 Number of priority seats Parameter Help Text
From 00016 To 00016
4.12.2.2 Number of wheelchair spaces Parameter Help Text
From 00002 To 00002
4.12.2.3 Number of PRM accessible toilets Parameter Help Text
1
4.12.2.4 Number of wheelchair accessible sleeping places Parameter Help Text
From 00000 To 00000

4.12.3 Passenger access and egress

4.12.3.1 Platform heights for which the vehicle is designed. Parameter Help Text
760 mm
680 mm mm
4.12.3.2 Description of any integrated boarding aids (if provided) Parameter Help Text
moveable steps
4.12.3.3 Description of any portable boarding aids if considered in the design of the vehicle for meeting the PRM TSI requirements Parameter Help Text
Evacuation walkway
4.14.1 Type of train detection systems for which the vehicle has been designed and assessed Parameter Help Text
track circuits

4.14.2 Detailed vehicle characteristics related to compatibility with train detection systems

4.14.2.1 Maximum distance between consecutive axles Parameter Help Text
14400 mm
4.14.2.2 Minimum distance between consecutive axles Parameter Help Text
2500 mm
4.14.2.3 Distance between the first and the last axle Parameter Help Text
93300 mm
4.14.2.4 Maximum length of the vehicle nose Parameter Help Text
4685 mm
4.14.2.5 Minimum wheel rim width Parameter Help Text
135 mm
4.14.2.6 Minimum wheel diameter Parameter Help Text
850 mm
4.14.2.7 Minimum flange thickness Parameter Help Text
22 mm
4.14.2.8 Minimum flange height Parameter Help Text
27.5 mm
4.14.2.9 Maximum flange height Parameter Help Text
36 mm
4.14.2.10 Minimum axle load Parameter Help Text
13.574 t
4.14.2.12 Wheel material is ferromagnetic Parameter Help Text
True
4.14.2.13 Maximum sanding output Parameter Help Text
000026.000 g per 000001.000 s
4.14.2.14 Possibility of preventing the use of sanding Parameter Help Text
True
4.14.2.16 Maximum impedance between opposite wheels of a wheelset Parameter Help Text
0.01 Ohm
4.14.2.17 Minimum vehicle impedance (between wheels and pantograph) (only for vehicles equipped for 1500V or 3000V DC) Parameter Help Text
AC 25kV-50Hz
0,05 Ohm