> ERATV > Registration Details

13-100-0002-9-001 Sm5

Status: Published
Latest Update: 2020-06-26 3:24:37 PM
PDF Excel XML

Section 1: General Information



0. Identification of the type

1. General Information

Section 2: Conformity with TSI

2.1 Conformity with TSI and Sections not complied with:

1524mm / AC 25kV-50Hz / ATP-VR/RHK
Noise (Dec 2006/66/EC)

2.3 Applicable specific cases (specific cases conformity with which has been assessed)

1524mm / AC 25kV-50Hz / ATP-VR/RHK
Noise (Dec 2006/66/EC)

2.2 Reference of ‘EC type examination certificates’

Reference of ‘EC type examination certificates’ - if module SB applied - and/or ‘design verification certificate’ - if module SH1 applied
None

Section 3: Authorisations

Finland

3.1.2 Current status

3.1.3 Historical

3.1.3.1 Initial Registration

Section 4: Technical Characteristics

Wheel set gauge

4.1.3 Wheel set gauge Parameter Help Text
1524 mm

4.13.1 Signalling

4.13.1.1 ETCS equipment on-board and its level Parameter Help Text
None
4.13.1.5 Class B or other train protection control and warning systems installed (system and if applicable version) Parameter Help Text
ATP-VR/RHK (Ebicab 900)
4.13.1.6 Special conditions implemented on-board to switch over between different train protection control and warning systems. Parameter Help Text
None

4.13.2 Radio

4.13.2.1 GSM-R equipment on board and its version (FRS and SRS) Parameter Help Text
None
4.13.2.3 Class B or other radio systems installed (system and if applicable version) Parameter Help Text
Tetra/Virve Teltronic (RTP-300)
4.13.2.4 Special conditions implemented on-board to switch over between different radio systems. Parameter Help Text
None
4.10.1 Energy supply system Parameter Help Text
AC 25kV-50Hz
4.10.2 Maximum power (to be indicated for each energy supply system the vehicle is equipped for) Parameter Help Text
AC 25kV-50Hz
2600 kW
4.10.3 Maximum rated current from the catenary (to be indicated for each electrical energy supply system the vehicle is equipped for) Parameter Help Text
AC 25kV-50Hz
104 A
4.10.5 Height of interaction of pantograph with contact wires (over top of rail) (to be indicated for each energy supply system the vehicle is equipped for) Parameter Help Text
AC 25kV-50Hz
0004.72 m to 0006.81 m
4.10.6 Pantograph head (to be indicated for each energy supply system the vehicle is equipped for) Parameter Help Text
AC 25kV-50Hz
1950 sc FI mm
4.10.7 Number of pantographs in contact with the overhead contact line (OCL) (to be indicated for each energy supply system the vehicle is equipped for) Parameter Help Text
AC 25kV-50Hz
1
4.10.10 Material of pantograph contact strip the vehicle may be equipped with (to be indicated for each energy supply system the vehicle is equipped for) Parameter Help Text
AC 25kV-50Hz
Plain carbon
4.10.11 Automatic dropping device (ADD) fitted (to be indicated for each energy supply system the vehicle is equipped for) Parameter Help Text
AC 25kV-50Hz
True
4.10.12 TSI conform energy meter for billing purposes installed on board Parameter Help Text
AC 25kV-50Hz
False

4.1.2 Speed

4.1.2.1 Maximum design speed Parameter Help Text
1524mm / AC 25kV-50Hz / ATP-VR/RHK
160 km/h
4.1.4 Conditions of use regarding train formation Parameter Help Text
Fixed formation
4.1.5 Maximum number of trainsets or locomotives coupled together in multiple operation. Parameter Help Text
1524mm / AC 25kV-50Hz / ATP-VR/RHK
3
4.1.8 Type meets the requirements necessary for validity of the vehicle authorisation granted by one Member State in other MSs Parameter Help Text
Not applicable
4.1.10 Structural category Parameter Help Text
P-II of EN12663-1:2010
4.2.1 Vehicle kinematic gauge (interoperable gauge) Parameter Help Text
FIN1 (Specific case Finland)
4.3.1 Temperature range Parameter Help Text
T2 (-40 to +35)
4.3.2 Altitude range Parameter Help Text
A1
4.3.3 Snow ice and hail conditions Parameter Help Text
severe
4.4.1 Fire safety category Parameter Help Text
A

4.5.2 Design mass

4.5.2.1 Design mass in working order Parameter Help Text
133200 kg
4.5.2.2 Design mass under normal payload Parameter Help Text
172000 kg
4.5.2.3 Design mass under exceptional payload Parameter Help Text
190800 kg

4.5.3 Static axle load

4.5.3.1 Static axle load in working order Parameter Help Text
16600 kg
4.5.3.2 Static axle load under normal payload/ maximum payload for freight wagons Parameter Help Text
17600 kg
4.5.3.3 Static axle load under exceptional payload Parameter Help Text
18400 kg
4.6.1 Cant deficiency (maximum uncompensated lateral acceleration) for which the vehicle has been assessed Parameter Help Text
1524mm
150 mm
4.6.2 Vehicle equipped with a cant deficiency compensation system (“tilting vehicle”) Parameter Help Text
False
4.7.1 Maximum train deceleration Parameter Help Text
1.78 m/s²

4.7.2.1 Brake performance on steep gradients with normal payload

4.7.2.1.1 Reference case of TSI Parameter Help Text
Reference case of (80 km/h, 21‰ (mm/m), 46 km)

4.7.3 Parking brake

4.7.3.2 Parking brake type (if the vehicle is fitted with it) Parameter Help Text
Automatic
4.7.3.3 Maximum gradient on which the unit is kept immobilized by the parking brake alone (if the vehicle is fitted with it) Parameter Help Text
40 ‰ (mm/m)

4.7.4.1 Eddy current brake

4.7.4.1.1 Eddy current brake fitted Parameter Help Text
False

4.7.4.2 Magnetic brake

4.7.4.2.1 Magnetic brake fitted Parameter Help Text
True
4.7.4.2.2 Possibility of preventing the use of the magnetic brake (only if fitted with magnetic brake) Parameter Help Text
True

4.7.4.3 Regenerative brake (only for vehicles with electrical traction)

4.7.4.3.1 Regenerative brake fitted Parameter Help Text
True
4.7.4.3.2 Possibility of preventing the use of the regenerative brake (only if fitted with regenerative brake) Parameter Help Text
True
4.8.1 Vehicle length Parameter Help Text
75.202 m
4.8.2 Minimum in-service wheel diameter Parameter Help Text
740 mm
4.8.4 Minimum horizontal curve radius capability Parameter Help Text
120 m
4.8.5 Minimum vertical convex curve radius capability Parameter Help Text
500 m
4.8.6 Minimum vertical concave curve radius capability Parameter Help Text
500 m
4.8.8 Suitability for transport on ferries Parameter Help Text
False
4.9.1 Type of end coupling (indicating tensile and compressive forces) Parameter Help Text
Automatic Type 10 / Schwab
4.9.2 Axle bearing condition monitoring (hot axles box detection) Parameter Help Text
Detectable by line side

4.9.3 Flange lubrication

4.9.3.1 Flange lubrication fitted Parameter Help Text
True
4.9.3.2 Possibility of preventing the use of the lubrication device (only if fitted with flange lubrication) Parameter Help Text
True
4.11.1 Pass-by noise level (dB(A)) Parameter Help Text
80 dB(A)
4.11.2 Pass-by noise level was measured under reference conditions Parameter Help Text
True
4.11.3 Stationary noise level (dB(A)) Parameter Help Text
58 dB(A)
4.11.4 Starting noise level (dB(A)) Parameter Help Text
73 dB(A)

4.12.1 General passenger related characteristics

4.12.1.1 Number of fixed seats Parameter Help Text
From 00232 To 00260
4.12.1.2 Number of toilets Parameter Help Text
1

4.12.2 PRM related characteristics

4.12.2.1 Number of priority seats Parameter Help Text
From 00024 To 00024
4.12.2.2 Number of wheelchair spaces Parameter Help Text
From 00002 To 00002
4.12.2.3 Number of PRM accessible toilets Parameter Help Text
1
4.12.2.4 Number of wheelchair accessible sleeping places Parameter Help Text
From 00000 To 00000

4.12.3 Passenger access and egress

4.12.3.1 Platform heights for which the vehicle is designed. Parameter Help Text
550 mm
4.12.3.2 Description of any integrated boarding aids (if provided) Parameter Help Text
moveable steps
4.12.3.3 Description of any portable boarding aids if considered in the design of the vehicle for meeting the PRM TSI requirements Parameter Help Text
none
4.14.1 Type of train detection systems for which the vehicle has been designed and assessed Parameter Help Text
track circuits
axle counters

4.14.2 Detailed vehicle characteristics related to compatibility with train detection systems

4.14.2.1 Maximum distance between consecutive axles Parameter Help Text
14840 mm
4.14.2.2 Minimum distance between consecutive axles Parameter Help Text
2700 mm
4.14.2.3 Distance between the first and the last axle Parameter Help Text
67820 mm
4.14.2.4 Maximum length of the vehicle nose Parameter Help Text
3691 mm
4.14.2.5 Minimum wheel rim width Parameter Help Text
135 mm
4.14.2.6 Minimum wheel diameter Parameter Help Text
740 mm
4.14.2.7 Minimum flange thickness Parameter Help Text
27.5 mm
4.14.2.8 Minimum flange height Parameter Help Text
29.5 mm
4.14.2.9 Maximum flange height Parameter Help Text
36 mm
4.14.2.10 Minimum axle load Parameter Help Text
10.8 t
4.14.2.12 Wheel material is ferromagnetic Parameter Help Text
True
4.14.2.13 Maximum sanding output Parameter Help Text
000500.000 g per 000030.000 s
4.14.2.14 Possibility of preventing the use of sanding Parameter Help Text
True
4.14.2.16 Maximum impedance between opposite wheels of a wheelset Parameter Help Text
0.01 Ohm
4.14.2.17 Minimum vehicle impedance (between wheels and pantograph) (only for vehicles equipped for 1500V or 3000V DC) Parameter Help Text
AC 25kV-50Hz
N/A