> ERATV > Registration Details

11-024-0001-5-001 TRAXX DE Variante F

Status: Published
Latest Update: 30/04/2014 10:54:07
PDF Excel XML

Section 1: General Information



0. Identification of the type

1. General Information

Section 2: Conformity with TSI

2.1 Conformity with TSI and Sections not complied with:

1435mm / Autonomous / ATB
Not conform to any TSI

1435mm / Autonomous / Crocodile Ebicab
Not conform to any TSI

1435mm / Autonomous / KVB
Not conform to any TSI

1435mm / Autonomous / Level 2
Not conform to any TSI

2.3 Applicable specific cases (specific cases conformity with which has been assessed)

1435mm / Autonomous / ATB
Not conform to any TSI
1435mm / Autonomous / Crocodile Ebicab
Not conform to any TSI
1435mm / Autonomous / KVB
Not conform to any TSI
1435mm / Autonomous / Level 2
Not conform to any TSI

2.2 Reference of ‘EC type examination certificates’

Reference of ‘EC type examination certificates’ - if module SB applied - and/or ‘design verification certificate’ - if module SH1 applied
0676/1/SB/2007/RST/EN/007
Reference of ‘EC type examination certificates’ - if module SB applied - and/or ‘design verification certificate’ - if module SH1 applied
0941/1/SB/2013/CCO/EN/RC100477-01

Section 3: Authorisations

Belgium

3.1.2 Current status

3.1.3 Historical

3.1.3.1 Initial Registration

Section 4: Technical Characteristics

Wheel set gauge

4.1.3 Wheel set gauge Parameter Help Text
1435 mm

4.13.1 Signalling

4.13.1.1 ETCS equipment on-board and its level Parameter Help Text
Level 2
4.13.1.2 ETCS baseline.version (x.y). If the version is not fully compatible it shall be indicated in brackets Parameter Help Text
2.0 (2.3.0.d)
4.13.1.4 ETCS national applications implemented (NID_XUSER of Packet 44) Parameter Help Text
None
STM Functions
4.13.1.5 Class B or other train protection control and warning systems installed (system and if applicable version) Parameter Help Text
ATB
KVB
Crocodile Ebicab (MEMOR)
4.13.1.6 Special conditions implemented on-board to switch over between different train protection control and warning systems. Parameter Help Text
Level 2 -> ATB
ATB -> Crocodile Ebicab (MEMOR)
ATB -> KVB
Crocodile Ebicab (MEMOR) -> KVB

4.13.2 Radio

4.13.2.1 GSM-R equipment on board and its version (FRS and SRS) Parameter Help Text
6/14
4.13.2.2 Number of GSM-R mobile sets in driving cab for data transmission Parameter Help Text
1
4.10.1 Energy supply system Parameter Help Text
Autonomous

4.1.2 Speed

4.1.2.1 Maximum design speed Parameter Help Text
1435mm / Autonomous / ATB
140 km/h
1435mm / Autonomous / Crocodile Ebicab
140 km/h
1435mm / Autonomous / KVB
140 km/h
1435mm / Autonomous / Level 2
140 km/h
4.1.4 Conditions of use regarding train formation Parameter Help Text
Vehicle to be used in general operation
4.1.5 Maximum number of trainsets or locomotives coupled together in multiple operation. Parameter Help Text
1435mm / Autonomous / ATB
2
1435mm / Autonomous / Crocodile Ebicab
2
1435mm / Autonomous / KVB
2
1435mm / Autonomous / Level 2
2
4.1.8 Type meets the requirements necessary for validity of the vehicle authorisation granted by one Member State in other MSs Parameter Help Text
Not applicable
4.1.10 Structural category Parameter Help Text
L of EN12663-1:2010
4.2.1 Vehicle kinematic gauge (interoperable gauge) Parameter Help Text
UIC 505-1
G1
4.3.1 Temperature range Parameter Help Text
-30 à +40
4.3.2 Altitude range Parameter Help Text
A1
4.3.3 Snow ice and hail conditions Parameter Help Text
nominal (EN 50125-1:1999 clause 4.7)
4.4.1 Fire safety category Parameter Help Text
A

4.5.2 Design mass

4.5.2.1 Design mass in working order Parameter Help Text
84000 kg
4.5.2.2 Design mass under normal payload Parameter Help Text
84000 kg
4.5.2.3 Design mass under exceptional payload Parameter Help Text
84000 kg

4.5.3 Static axle load

4.5.3.1 Static axle load in working order Parameter Help Text
21000 kg
4.5.3.2 Static axle load under normal payload/ maximum payload for freight wagons Parameter Help Text
21000 kg
4.5.3.3 Static axle load under exceptional payload Parameter Help Text
21000 kg
4.5.4 Quasi-static guiding force (if exceeds the limit defined in TSI or not defined in the TSI) Parameter Help Text
1435mm
66.9 kN
4.6.2 Vehicle equipped with a cant deficiency compensation system (“tilting vehicle”) Parameter Help Text
False
4.7.1 Maximum train deceleration Parameter Help Text
1.59 m/s²

4.7.2.1 Brake performance on steep gradients with normal payload

4.7.3 Parking brake

4.7.3.2 Parking brake type (if the vehicle is fitted with it) Parameter Help Text
Manual operated from the vehicle
4.7.3.3 Maximum gradient on which the unit is kept immobilized by the parking brake alone (if the vehicle is fitted with it) Parameter Help Text
40 ‰ (mm/m)

4.7.4.1 Eddy current brake

4.7.4.1.1 Eddy current brake fitted Parameter Help Text
False

4.7.4.2 Magnetic brake

4.7.4.2.1 Magnetic brake fitted Parameter Help Text
False

4.7.4.3 Regenerative brake (only for vehicles with electrical traction)

4.7.4.3.1 Regenerative brake fitted Parameter Help Text
False
4.8.1 Vehicle length Parameter Help Text
18.9 m
4.8.2 Minimum in-service wheel diameter Parameter Help Text
1170 mm
4.8.4 Minimum horizontal curve radius capability Parameter Help Text
100 m
4.8.5 Minimum vertical convex curve radius capability Parameter Help Text
500 m
4.8.6 Minimum vertical concave curve radius capability Parameter Help Text
500 m
4.8.8 Suitability for transport on ferries Parameter Help Text
False
4.9.1 Type of end coupling (indicating tensile and compressive forces) Parameter Help Text
Manual
4.9.2 Axle bearing condition monitoring (hot axles box detection) Parameter Help Text
Onboard equipped (OP)
Detectable by line side

4.9.3 Flange lubrication

4.9.3.1 Flange lubrication fitted Parameter Help Text
True
4.9.3.2 Possibility of preventing the use of the lubrication device (only if fitted with flange lubrication) Parameter Help Text
False
4.11.1 Pass-by noise level (dB(A)) Parameter Help Text
83 dB(A)
4.11.2 Pass-by noise level was measured under reference conditions Parameter Help Text
True
4.11.3 Stationary noise level (dB(A)) Parameter Help Text
66 dB(A)
4.11.4 Starting noise level (dB(A)) Parameter Help Text
81 dB(A)
4.14.1 Type of train detection systems for which the vehicle has been designed and assessed Parameter Help Text
track circuits
axle counters

4.14.2 Detailed vehicle characteristics related to compatibility with train detection systems

4.14.2.1 Maximum distance between consecutive axles Parameter Help Text
7790 mm
4.14.2.2 Minimum distance between consecutive axles Parameter Help Text
2600 mm
4.14.2.3 Distance between the first and the last axle Parameter Help Text
12990 mm
4.14.2.4 Maximum length of the vehicle nose Parameter Help Text
2955 mm
4.14.2.5 Minimum wheel rim width Parameter Help Text
139 mm
4.14.2.6 Minimum wheel diameter Parameter Help Text
1170 mm
4.14.2.7 Minimum flange thickness Parameter Help Text
26 mm
4.14.2.8 Minimum flange height Parameter Help Text
28 mm
4.14.2.9 Maximum flange height Parameter Help Text
68 mm
4.14.2.10 Minimum axle load Parameter Help Text
20 t
4.14.2.12 Wheel material is ferromagnetic Parameter Help Text
True
4.14.2.13 Maximum sanding output Parameter Help Text
000500.000 g per 000030.000 s
4.14.2.14 Possibility of preventing the use of sanding Parameter Help Text
True
4.14.2.16 Maximum impedance between opposite wheels of a wheelset Parameter Help Text
0.01 Ohm
4.14.2.17 Minimum vehicle impedance (between wheels and pantograph) (only for vehicles equipped for 1500V or 3000V DC) Parameter Help Text
Autonomous
000000.000000 Ohm per 000000.000000 Hz